.223 Remington

Once Fired .223 Brass For Sale

We sell bulk once fired Lake City .223 Remington brass in 500-piece lots for reloaders. Our Lake City brass comes from military and law enforcement shooting ranges, and sometimes from private ranges.

How We Sort and Count It

Every lot is sorted and inspected. We remove any case that does not appear to be reloadable and any case with three or more blemishes, so a case with a small dent or a minor mark can still ship. We count by weight rather than by hand, and the amount of overage depends on the quantity you order.

We buy from sources where once fired brass is most likely, but we can't guarantee that every case has been fired only once, so inspect each case before you reload it.

What Condition It Ships In

Our .223 brass ships in range condition with the spent primers still in place. It is not deprimed, swaged or resized. If you want it cleaned, choose the polished option on the product page. Polished brass is tumbled with stainless steel pins to remove dirt and tarnish.

Preparing Once Fired .223 Brass for Reloading

Deprime and inspect every case, and retire any case with a split neck, a crushed mouth, a loose primer pocket or damage near the case head. If a case has a crimped primer, as military brass usually does, swage or ream the primer pocket once before priming. It stays uncrimped for the life of the case. For semi-automatic rifles such as the AR-15, full-length size the cases, or use a small base die, so your reloads chamber and extract reliably.

SAAMI's maximum case length for .223 Remington is 1.760 inches. Check case length after sizing and trim to the length in your reloading manual when needed.

Is .223 Remington Brass the Same as 5.56 Brass?

The cases share the same external dimensions under SAAMI specifications. The differences between .223 Remington and 5.56 are in the chamber and pressure standards, not the brass. Internal capacity can vary from one manufacturer or lot to the next, so work up from your reloading manual's starting charge with each new lot. SAAMI considers firing any 5.56 ammunition in a rifle chambered only for .223 Remington an unsafe combination, so check your rifle's markings and owner's manual. If you also load for 5.56, see our once fired 5.56 brass.

Turning .223 Brass Into .300 Blackout

.300 Blackout uses the same case head as .223 Remington and 5.56, so the cases can be cut down and reformed. If you would rather skip that work, our converted Lake City .300 Blackout brass is already deprimed, swaged, formed and cut. You trim it to final length and chamfer it before loading.

Have more questions? See our once fired brass FAQ.

Looking for Lake City brass in other calibers? See all of our Lake City brass.

Filters
Set Descending Direction

1 Item

per page
View as Grid List
Filters
Set Descending Direction

1 Item

per page
View as Grid List